4.3 System Programming
Hotel Application
121
System Programming 4-55
Description Assigns whether the hotel application is enabled or disabled.
Selection
Disable / Enable
Default Disable
Programming 1. Enter 121.
Display: Hotel Apply Asn
2. Press NEXT.
Display example: Hotel : Disable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions If “Enable” is selected, the menu “Hotel” is displayed on the operator
extension’s KX-T7235 and the “Check-In / Check-Out” feature is
available.
Feature Reference Section 3, Features,
HOTEL APPLICATION
To Next Page
Loading...
