H 3 Features
3-72 Features
• If the operator uses the paired DSS console, the operator can refer to
the check-in status on the DSS console.
• It is possible to give a header to the printed bill such as the hotel's
name or greeting or to assign the starting location of output data with a
personal computer.
• A new page is started for each print-out.
• It is possible to limit telephone usage to a pre-assigned amount by
System Programming.
• The KX-TD1232 with the KX-TD180D or KX-TD181D supports the
Pay Tone service of the Central Office.
• Your Central Office sends the pay tone or the ISDN S0 line sends pay
message so that the counting for fee starts for the call.
Programming References
Section 4, System Programming,
[009] Budget Management
[010] Charge Margin Rate
[121] Hotel Application
[436] Pay Tone Assignment
[601] Class of Service
Feature References Section 4, Features,
Budget Management Charge Fee Reference
Operation References Operator Service Features,
—User Manual Hotel Application
Timed Reminder, Remote (Wake-Up Call)
Description Allows the operator to set, cancel and confirm the wake-up call
remotely for an extension.
Conditions When either an operator or the extension sets a new time, the pre-
set time is cleared.
Programming References
Section 4, System Programming,
[100] Flexible Numbering, Timed reminder, remote
Feature References Section 3, Features,
Timed Reminder
Operation References Operator Service Features,
—User Manual Hotel Application
To Next Page
Loading...
