3 Features I
Features 3-73
Intercept Routing
Description Provides automatic redirection of incoming outside calls. There are
two types of Intercept Routing. In the first case a call cannot be
placed on the called party. This is called Rerouting. In the second
case the call is not answered within a programmed time period.
This is called Intercept Routing – No Answer (IRNA).
Conditions • Intercept Routing applies to DIL 1:1, DIL 1:N, TAFAS, Call
Forwarding, and Station Hunting.
• The final destination of intercepted calls must be programmed for day
and for night modes. There are three possible destinations:
1) an extension
2) an external pager
• If the destination is in Do Not Disturb, Do Not Disturb does not
function and the call is placed there.
Programming References
Section 4, System Programming,
[203] Intercept Time
[409]–[410] Intercept Extension — Day / Night
Feature References None
Operation References Not applicable.
Intercom Calling
Description Allows the extension user to call another extension user within the
system.
Conditions • Extension numbers are assigned to all extensions by system
programming. An extension number is programmed to be two, three, or
four digits.
• Names can be given to extension numbers by system programming. An
extension number and a name, if programmed, is shown on the display
DPT during an intercom call.
• DSS buttons permit one-touch access to an extension and provide Busy
Lamp Field.
• KX-T7235 user can make an extension call with an extension dialing
directory on the display.
To Next Page
Loading...
