R 3 Features
3-100 Features
Remote Station Lock Control
Description The operator is given the privilege of controlling Electronic Station
Lockout on any station.
Conditions Remote Station Lock Control is superior to Electronic Station Lockout.
If Station Lockout has already been set by the extension user and Remote
Station Lock is set by the operator, cancelling the lock is only possible by
the operator.
Programming References
No programming required.
Feature References Section 3, Features,
Electronic Station Lockout
Operation References Operator Service Features,
—User Manual Remote Station Lock Control
Reverse Circuit
Description This feature can be used to detect a reversal of CO line polarity
from Central Office, when trying to make an outside call. This is
useful for determining the start and completion of CO line calls.
Conditions This feature needs system programmings for each CO line.
Programming References
Section 4, System Programming,
[420] Reverse Circuit Assignment
Feature References None
Operation References Not applicable.
Ringing, Delayed
Description If Direct In Lines (DIL) 1:N is established, a telephone set is
originally set to ring instantly. This setting can be changed to
delayed ringing, no ringing or no incoming call (disable) on a CO
line number basis.
To Next Page
Loading...
