3 Features E
*: Available for KX-TD1232 only. Features 3-63
Conditions • Every extension should belong to an extension group but cannot belong
to more than one group.
• If System Connection* is employed, an extension group can include
extensions on both systems.
Programming References
Section 4, System Programming,
[106] Station Hunting Type
[602] Extension Group Assignment
Feature References Section 3, Features,
Call Pickup, Group Station Hunting
Paging – Group
Operation References Not applicable.
External Feature Access
Description Allows the extension user to have access to the features of a host
PBX or Central Office, such as Call Waiting, etc. Register Recall
signal can be sent out to the CO line.
Conditions • This feature is effective only during an outside call.
• The Register Recall Signal must be assigned as required by the host
PBX or CO line.
• With a proprietary telephone, the RECALL button or the feature
number is used to perform this function. With a single line telephone,
the feature number is used to perform this feature.
• During outside calls, a RECALL stored in System Speed Dialing,
Station Speed Dialing or One-Touch Dialing functions as External
Feature Access, not as Recall.
Programming References
Section 4, System Programming,
[100] Flexible Numbering, External feature access
[413] Register Recall Signal Time
[990] System Additional Information, Field (3)
Feature References Section 3, Features,
Host PBX Access Recall
Operation References DPT Features, SLT Features;
—User Manual External Feature Access
To Next Page
Loading...
