4.10 Resource Programming
External Pager Confirmation Tone
805
System Programming 4-131
Description Used to remove the confirmation tone for external pagers. The
default setting sends confirmation tone 2 to the external pagers
before paging is broadcast.
This programming applies to all the
external pagers.
Selection On / Off
Default On
Programming 1. Enter 805.
Display: Ext-Pag Ack-Tone
2. Press NEXT.
Display example: Tone:On
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions The external pager is a user-supplied item. For KX-TD816, one external
pager can be installed, for KX-TD1232, two external pagers can be
installed per system. External pagers 1 and 2 are installed in the Master
System, 3 and 4 in the Slave, if available.
Feature References Section 3, Features,
Confirmation Tone Paging – External
Paging – All
To Next Page
Loading...
