4.4 Timer Programming
CO-to-CO Call Duration Time
206
4-62 System Programming
Description Sets the maximum time allowed for a conversation between two
outside parties. When the timer expires, the CO-to-CO call is
disconnected.
Selection
Time (minutes): 1 through 64
Default 10 min
Programming 1. Enter 206.
Display: CO-CO Dur. Time
2. Press NEXT.
Display example: Time:10 min
3. Enter the time.
To change the current entry, press CLEAR and the new time.
4. Press STORE.
5. Press END.
Conditions You cannot leave the entry empty.
Feature References Section 3, Features,
Call Forwarding – to CO Line
Call Transfer, Screened – to CO Line
To Next Page
Loading...
