4.3 System Programming
User Password
4-54 System Programming
120
Description Assigns the password required for entering User Programming
mode.
In the User Programming Mode, any display digital proprietary
telephone user in the system can set the following programs:
[000] Date and Time Set
[001] System Speed Dialing Number Set
[002] System Speed Dialing Name Set
[003] Extension Number Set
[004] Extension Name Set
Selection
Password: 4 through 7 digits
Default 1234
Programming 1. Enter 120.
Display: User Password
2. Press NEXT.
Display example: Password:1234
3. Enter a password.
To change the current entry, press CLEAR and the new password.
4. Press STORE.
5. Press END.
Conditions • The password can be from four to seven digits long. The valid numbers
are from 0 through 9.
• If less than four digits are entered, they are not stored.
• You cannot leave the entry empty.
Feature References None
To Next Page
Loading...
