Panasonic KX-T30865 - DID Subscriber Number Removed Digit and Received Digit

4.6 CO Line Programming
DID Subscriber Number Removed Digit and Received Digit
433
System Programming 4-105
Description Assigns received digits of DID subscriber number to each DID
table. Besides, removed digits from the received digits can be
programmed. In this case, digits are removed from the beginning
of the received digits.
Selection • DID table number: 1 through 4
• Number of digits to be deleted (RMV): 0 through 6
(0=no deleting)
• Number of digits to be received (RCV): 1 through 7
Default • All DID tables – RMV:0
• DID table 1 – RCV:1, other DID tables – RCV:3
Programming 1. Enter 433.
Display: DID RMV/RCV Dial
2. Press NEXT.
Display: DID Table NO?–>
3. Enter a DID table number.
To enter DID table number 1, you can also press NEXT.
Display example: 1:RMV:1,RCV:2
4. Enter the number of digits to be deleted or received.
To change the current entry, press CLEAR and the new number.
5. Press STORE.
6. To program another DID table, press NEXT or PREV, or
SELECT and the desired DID table number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions You cannot leave the entry empty.
Feature References Section 3, Features,
Direct Inward Dialing (DID)