4.10 Resource Programming
Modem Standard*
814
*: Available for KX-TD1232 only. System Programming 4-135
Description Assigns the modem standard. There are two standards available –
BELL and CCITT.
Selection BELL / CCITT
Default CCITT
Programming 1. Enter 814.
Display: MODEM Standard
2. Press NEXT.
Display example: MODEM:CCITT
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions Select the standard used by your modem.
Feature References Section 3, Features,
System Programming and Diagnosis with Personal Computer
To Next Page
Loading...
