3 Features E
*: Available for KX-TD1232 only. Features 3-61
Conditions • Programming the DSS and PF buttons can be done only from the paired
telephone using station programming or programming with a personal
computer. System programming with Proprietary Telephone is not
available.
• If the extension number assigned to a DSS button is changed to another
number, the DSS button automatically follows the new number. (Re-
programming is not necessary.)
• During System Connection*, DSS Consoles must be paired with
telephones in the same system.
Connection References
Section 2, Installation,
2.3.3 Extension Connection
Programming References
Section 4, System Programming,
[007] DSS Console Port and Paired Telephone Assignment
Station Programming ......................................................User Manual,
Flexible Button Assignment
Feature References Section 3, Features,,
Button, Flexible One-Touch Transfer by DSS
Button
Operation References DSS Console Features
—User Manual
Electronic Station Lockout
Description Allows the extension users to lock their stations so that other users
cannot make outgoing outside calls. Any 3-digit numeric code can
be used to lock the station. The same code is used to unlock it.
Conditions • Making intercom calls and receiving intercom or outside calls are
permitted on the locked station.
• Remote Station Lock Control overrides Electronic Station Lockout. If
the operator sets Remote Station Lock on a station that has already been
locked by the station user, the user cannot unlock it.
• It is programmable to admit the press of the Register Recall button
during an outside call on the locked station.
• Emergency dial numbers programmed in [311] “Emergency Dial Set”
can be dialed on a locked station.
To Next Page
Loading...
