V 3 Features
3-130 Features
• A mailbox number is a respective extension number by default. The
mailbox number can be changed, only if program [990] “System
Additional Information, Field (18)” is set to “free.”
• Pressing the Voice Mail Transfer button and dialing the extension
number allows the extension user to transfer to the corresponding
mailbox. In this case, Follow On ID function is available.
• The Voice Mail extension should be set to Data Line Security to
achieve proper recording.
• The KX-TD816 has one Extension Cards and can have one 8-Station
Line Unit. The KX-TD1232 has two Extension Cards and can have two
8-Station Line Units. It is recommended that you do not connect more
than two VM ports to each card or unit.
Connection References
Section 2, Installation,
2.3.3 Extension Connection
2.4.4 8-Station Line Unit Connection
Programming References
Common Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Call forwarding / do not disturb set / cancel,
Message waiting set / cancel / callback
[113] VM Status DTMF Set
[114] VM Command DTMF Set
[407]–[408] DIL 1:1 Extension — Day / Night
[409]–[410] Intercept Extension — Day / Night
[603]–[604] DIL 1:N Extension and Delayed Ringing — Day / Night
[609] Voice Mail Access Codes
[990] System Additional Information, Fields (6) through (9), (18)
Station Programming.......................................................User Manual,
Flexible Button Assignment – MESSAGE Button, Voice Mail (VM)
Transfer Button
For VM Service Section 4, System Programming,
[106] Station Hunting Type (Select Voice Mail Hunting.)
[990] System Additional Information, Field (10)
For AA Service Section 4, System Programming,
[106] Station Hunting Type (Select Automated Attendant Hunting.)
[990] System Additional Information, Field (24)
Feature References Section 3, Features,
Call Forwarding – All Calls Call Forwarding – No Answer
Call Forwarding – Busy Intercept Routing
Call Forwarding – Busy / No Station Hunting
Answer
To Next Page
Loading...
