4.3 System Programming
Day / Night Service Starting Time (contd.)
102
4-38 System Programming
8. Press SELECT for AM or PM.
9. Press STORE.
10. To program another day / night mode or day of the week,
press NEXT or PREV, or SELECT and the day of the
week selection number.
11. Repeat steps 4 through 10.
12. Press END.
Conditions • To select the desired day, you may keep pressing NEXT at step 3. To
assign every day of the week to one selection, press the key at step
3. In this case, the display shows the contents programmed for Sunday.
• If day / night switching is unwanted, select “Disable” at step 4.
• You cannot leave the entry empty.
Feature References Section 3, Features,
Night Service
To Next Page
Loading...
