4.8 Extension Programming
DIL 1:N Extension and Delayed Ringing — Day / Night (contd.)
603-604
System Programming 4-119
8. Repeat steps 4 through 7.
9. Press END.
Conditions • An extension can be assigned as the destination of as many CO lines as
is required.
• In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
Jack numbers in the out-of-service system are unacceptable.
• For an explanation of jack numbering, see “Rotation of jack number”
on page 4-7.
• To assign all jacks or all CO lines to one selection, press the key at
step 3 or step 4. In these cases, the display shows the contents
programmed for Jack 01 or for CO01.
• There are six notification methods:
(1) Immediate ringing: rings immediately
(2) 4 ring delay
(3) 6 rings delay
(4) 8 rings delay
(5) No ring: only the indicator flashes
(6) Disable: no incoming call
• When you change the jack number by pressing NEXT or PREV, the
CO line number is not changed. Example #03-1:CO06.....Press
NEXT.....#03-2:CO06
Feature References Section 3, Features,
Direct In Lines (DIL) Ringing, Delayed
Night Service
To Next Page
Loading...
