4.8 Extension Programming
Outgoing Permitted CO Line Assignment — Day / Night (contd.)
605-606
System Programming 4-121
Conditions • In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
Jack numbers in the out-of-service system are unacceptable.
• For an explanation of jack numbering, see “Rotation of jack number”
on page 4-7.
• To assign all jacks or all CO lines to one selection, press the key at
step 3 or 4. In these cases, the display shows the contents programmed
for Jack 01 or CO01.
• To assign no CO line group for a station, press CLEAR at step 4.
Feature References Section 3, Features,
CO Line Connection Assignment – Outgoing
Night Service
To Next Page
Loading...
Need help?
General
