Protective
function
Error code No.
Causes Measures
Main Sub
6-16
1. When in Trouble
Protective function (Detail of error code)
*
Other error
Other
No.
Control circuit has malfunctioned due to
excess noise or other causes.
Some error has occurred inside of the
driver while triggering self-diagnosis
function of the driver.
• Turn off power once, and turn on again.
• Even so, if an error indication appears
and an error occurs, failure is possible.
Discontinue the use and replace the motor
and servo driver. Return to a dealer for
investigation (repair).
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
