PENKO 1020 - Zero Tracking

5.1.2. Menu Settings -System Setup - Indicator Setup - continue-
1020 Indicator
Zero tracking
Zero tracking is able to tune the zero point back to zero when the scale becomes
dirty.
Scroll through the Zero tracking menu using the UP or DOWN key. Press Enter
for editing the setting.
Settings in the Zero tracking menu
Set the maximum offset to tune back to zero. Choose a weight between 0 and
8388607.
Set the step size that will be tuned every time when the offset is within the
maximum range. Choose a step size between 0 and 8388607.
Set the time that the signal has to be within the range to tune 1 step back to zero.
Choose a time between 0.00s and 10.00s.
36