5.1.7. Menu Settings -System Setup - Printer - continue-
1020 Indicator
Setting in the Header menu
For Line 1, 2, 3 and 4 enter the desired printer header. Maximum number of
chartacters per line: 32.
Use the UP, DOWN, LEFT and RIGHT key to enter the header. The UP and
DOWN keys are used for changing from line, the LEFT and RIGHT key is used
for changing the position of the cursor within the line. When the correct character
is chosen, press Enter. If a mistake is made, delete with the ZERO key. Confirm
the complete password by pressing Enter when the cursor is set on OK.
If different characters are required, press the Preset Tare key.
x1
74
1. OK for confirming header
2. Walk through header going right
3. Walk through header going left
4. Space
2
1
3
4
To Next Page
Loading...
