PENKO 1020 - Usb

5.1.9. Menu Settings -System Setup - Software Update - continue-
1020 Indicator
Use double click or the arrow button to put the address in the ‘Destination List’
and click ‘OK’.
Click ‘Firmware update’ to start the update.
The PENKO 1020 will automatically reboot and the ‘Firmware Update Manager’
wil show ‘Updated’.
USB
Connect the PENKO 1020 to the computer through USB. Start PI Mach II.
Start the Firmware Update Manager.
Click ‘Open’ and select the PIP file.
80