PENKO 1020 - CAN Port; Setting in the CAN Port Menu

5.1.1. Menu Settings -System Setup - Port Setup - continue-
1020 Indicator
CAN Port
In this menu, all settings for the CAN comport can be set.
Scroll through the CAN Port menu using the UP or DOWN key. Press Enter for
editing the setting.
Setting in the CAN Port menu
Select the communication protocol. Choose between None and Buslink.
Set the Buslink Address. Up to 8 devices can communicatie with each other,
sharing inputs, outputs, markers and indicators. Choose between 1-8.
Set the Buslink subaddress. When using a subaddress, up to 40 devices can
communicate with each other. Choose between 1-5.
29