7 - 2
Controls
7.03 Bobbin thread monitoring with stitch counting
● About 100 stitches before reaching the
preset number of stitches, LED 1
flashes.
● After the thread has been trimmed and
the bobbin changed, the stitch counting
begins anew.
Presetting the number of
stitches, see Chapter 9.10 Set-
ting the stitch counting
function for bobbin thread
monitoring.
Fig. 7 - 03
1
7
.04
Pedal
0 = Machine stop
1 = Sew
2 = Raise roller presser
3 = Trim thread and raise roller
presser
Other pedal functions can be set
with the programming function,
see Chapter 10 Sewing.
Fig. 7 - 04
0
1
2
3