7 - 3
Controls
-
7.05 Knee switch
● By operating knee switch 1 it is possible
to choose between 2 preset amounts of
fullness or 2 stitch lengths.
● In the programmed sewing mode it is
possible to switch to the next seam
section with knee switch 1.
The function of knee switch 1
must be switched on with the
control panel (see chapter 10
Sewing)
Fig. 7 - 05
1
7.06 Knee lever
● The roller presser can be raised by
pressing the knee lever 1 in the direction
of the arrow.
1
Fig. 7 - 07
To Next Page
Loading...
