12 - 2
Care and maintenance
12.02 Oiling the hook
Switch the machine off!
Danger of injury if the machine
is started accidentally!
● Before commissioning the machine, and
after long periods out of operation, pour a
few drops of oil into the hook race (see
arrow).
Fig. 12 - 02
12.03 Checking the oil levels
Before each operation check
the oil levels.
Oil must always be visible in
the reserve tanks 1 and 2.
● If necessary, fill in oil through the
respective hole of the reserve tank.
Fig. 12 - 03
1
2
Only use oil with a mean viscosity of 22.0 mm²/s at 40ºC and a density of
0.865 g/cm³ at 15ºC.
We recommend PFAFF sewing machine oil, part number 280-1-120 144.
86-005
To Next Page
Loading...
Need help?
General
