9 - 10
Setting up
9.11 Setting the stitch count function for bobbin thread control
● Switch on the machine.
● Select the input mode by pressing the TE/Speed key twice.
● Set the number of stitches to be sewn with one bobbin by pressing the corresponding
+/- keys.
● Conclude the input by pressing the TE/Speed key. The value entered is then stored and
the sewing mode selected.
To activate the stitch count function the value of parameter "104" must be set at "1".
3
2 x
No VAL
101 II
TE
● By pressing the corresponding +/- key select the parameter "105".
No
No VAL
105 100
TE
2.5 2.5
VAL
To Next Page
Loading...
