8 - 8
Installation and commissioning
2 x
No
● Switch on the machine.
● Press TE/Speed key twice to select the input mode.
● Select the parameter group "600" by pressing the corresponding +/- key.
● Confirm the selection by pressing the corresponding +/- key.
● Enter the code number, see Chapter 9.10 Entering/changing the code number.
2.5 2.5
No VAL
101 II
TE
No
600
TE
No
603
TE
No
603
TE
● Select the parameter group "603" by pressing the corresponding +/- key.
● Let the machine carry out one revolution by pressing the corresponding +/- key.
● Check the needle bar position.
To Next Page
Loading...
