Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 500 automated external defibrillator Replacement Procedures
11-15
Recording User-Defined Setups Page 6 of 6
29. Press the ANALYZE (or MENU) key to advance to the SERIAL NUMBER screen.
Record the serial number.
30. (Monophasic AED, operating system 4.42 or earlier only:) Press the
ANALYZE
(or MENU) key to advance to the DASH NUMBER screen. Record the dash
number.
31. Turn off the LIFEPAK 500 AED.
After recording the user-defined and service setups, turn off the AED. Continue
to the Removing Top Cover procedure to resume AED disassembly.
To Next Page
Loading...
