Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 500 automated external defibrillator Replacement Procedures
11-37
Removing Main PCB—Monophasic AED Page 3 of 3
7. Carefully lift out the Main PCB, place it in a static-protective bag, and set it
aside.
8. After removing the Main PCB, jump to the appropriate replacement
procedure:
– Replacing Battery Plate Wire Harness
– Removing Energy Storage Capacitor—Monophasic AED
– Replacing Wave Shaping Inductor—Monophasic AED
– Installing Main PCB—Monophasic AED
To Next Page
Loading...
