Polycom Vortex EF2241 - Page 122

B01VTXMODO*2
Toggle status of VTX
mode on outputs 1-4, A-D
.
B01VTXMODO*abcdefgh , where each of the letters
(a, b, etc.) is either 0 or 1 depending of the current
status VTX mode on the corresponding output. If
this command was sent after the example above,
then the status message would be
B01VTXMODO*00001111 .
B01VTXMODO*?
Query status of VTX mode
on outputs 1-4, A-D .
B01VTXMODO*abcdefgh , where each of the letters
(a, b, etc.) is either 0 or 1 depending of the current
status VTX mode on the corresponding output. If
this command was sent after the example above,
then the status message would be
B01VTXMODO*00001111 .