Polyend Play+ - Page 102

102
Polyend Play+ Manual Rev 2
NOTES
The control knob for the macro operates over a range of 0-127 or -63 to 64
if a bipolar range is set. This will be applied to each of the macro
destinations where the macro amount determines the actual parameter
range and the patch parameter to default starting point.
----- Voice -----
Glide Time 0.00 s
Volume 100 %
Attack
Decay/Release
Glide Mode Always
----- Macros -----
...th 1 (WTFM) > Edit patch
Back Play Perform
Samples & Synths
5
Volume
Panning
‘Velocity’
Off
Voice Volume
1.00
Macro Name
Bipolar
Knob range 0-127
Start Point 100%
0 - 127
Parameter 1
Parameter that the knob will affect
Amount 1
etc
Macro
Panel Knobs
Patch
Multiplier of generated value
e.g. 2.00 x 100% would double the sound,
effectively +6dB of perceived loudness
Macro Range
Example: Volume Macro Mapping for ACD Velocity
A macro is controlled by one knob function but can change up to 5 parameters.
These are mapped in the patch editor.
The Macro knobs are available when in MIDI / Synth mode