Polyend Play+ - CC Messages

202
Polyend Play+ Manual Rev 2
NOTES
10.10 CC Messages.
MIDI Continuous Control Change Messages, also shortened to CC, are
available in Play+. CC Messages allow parameter changes to be
communicated with a value range of 0-127. A pattern steps can be
programmed from the CC parameter with a value for the step. Manual knob
control and note preview output is based on the preview setting.
No Note
(2)
CC Values can be
assigned without a note
Note
CC values can be
applied along with notes
Example
Sequencing CC Messages. External Filter Cutoff
Manual adjustment of CC messages is sent out only when sequencer is stopped
as part of the preview. Sequenced CC steps transmit when the pattern plays.
(1)
CC Number assignment is made in the Main Menu ‘MIDI’ conguration menu
under the ‘CC Mapping’ options. Default is shown in the example illustration.
(2)
A ‘No Note’ function is selectable within the ‘Note’ Parameter options.
51 2 103 114 126 7
7
8 9
127
127
0
0
Filter Cutoff
Resonance
Track Length
Play Mode
Sample Attack
Sample Decay
74
71
Filter Cutoff
Resonance
Track Length
Play Mode
Sample Attack
Sample Decay
74
71
CC#74
CC#
(1)
Value
Steps
Parameter
Filter 70
External Device
Play+
Filter CC#74
CC#74
65 0 100 12770 60
MIDI In
MIDI
10