150
Polyend Play+ Manual Rev 2
NOTES
7.3 Playing & Chaining Patterns.
Patterns can be played individually or chained to play in sequence as a
complete set or as a selected series of patterns. The play functions are
applied in any mode, but chaining patterns is performed in the pattern
mode view. It is useful to create chained sections and then to manually
change playback between them for live improvisation.
Pattern 1
Pattern 1 Pattern 3Pattern 2 Pattern 4
Press [Play]
Press [Shift] + [Play]
Press [Play] to play and loop only the current
pattern. Press [Play] again to stop playback.
A chained sequence plays until
an empty pad is reached and
then loops playback from start.
Press [Shift] + [Play] to play and loop all the chained patterns in
sequence until an empty pad is reached. Press [Play] to stop playback.
When a sequence is playing, other sequences or patterns can be manually triggered by pressing
the [Pad]. This will switch between patterns on the y. Patterns cued to play next will ash its pad
orange and light blue.
Cue a pattern to play after the completion of the current pattern: Press [Pad] for next pattern.
Immediately switch playback to another pattern: Press [Shift] + [Pad] for next pattern.
Press [Patterns] to access the Pattern Mode.
1 32 4 5
Arrangements & Variations
7
To Next Page
Loading...
