189
Polyend Play+ Manual Rev 2
NOTES
10.3 MIDI Conguration.
MIDI Settings are accessed by pressing the (Screen) Knob. These will
dictate if Play+ leads on functions like clock and transport or if it acts as a
secondary follower, responding to control and synchronisation from another
primary device control.
Play+ can send MIDI notes out from the sequencer pattern, with the output
channel assigned per step as well as the other note parameters.
▌ ACCESSING THE MIDI CONFIG OPTIONS
1. Press (Screen) knob to open the conguration menu.
2. The entry point of the menu may be in one of the submenus. Press
[Back] to backup to the main menu if required.
3. Turn (Screen) to navigate the menu and highlight ‘MIDI’.
4. Press (Screen) knob to select the MIDI options.
5. The Settings can be changed by Pressing (Screen) on any option to
select its options. The CC Mapping option opens the sub menu for
setting the control change messaging.
Menu Option Description
MIDI
CC Mapping
Sub Menu
Opens sub menus for setting the control change
message mapping for channels 1-16 for the MIDI
connection or for the USB connection.
MIDI Clock In
Sets the Play+ clock input for internal generated
clock (default) or an external clock received
through the USB Input or MIDI In jack. Tempo
reects external device BPM. A warning message
is by Play+ displayed if the external clock is lost.
MIDI Transport In
Sets the source of transport control commands, off
(default), or control from an external device
received through the USB or MIDI In jack.
MIDI Clock Out
Sends the Play+ clock output to other devices. Off,
USB, MIDI Out jack or USB+MIDI jack options.
MIDI Transport Out
Sends Play+ transport control commands to other
devices. Set to Off, USB, MIDI Out jack or
USB+MIDI jack options.
MIDI Notes In
Sets the input of how notes are received from an
external device. Set to Off, USB, MIDI In jack or
USB options.
MIDI Notes In Channel
Sets the MIDI channel for external note inputs.
Select All channels as Omni or Channel 1-16.
MIDI
10
To Next Page
Loading...
