Polyend Play+ - Tracker MIDI Integration

210
Polyend Play+ Manual Rev 2
NOTES
10.14 Tracker MIDI Integration.
Play+ integrates seamlessly with Polyend Tracker. The option to set CC
values for Tracker is also available in Play+ MIDI CC Port / Channel
conguration. Tracker operates in MIDI synthesizer mode that allows
integration when controlling Tracker from an external MIDI device and by
controlling up to 8 voices across MIDI. Trackers selected instrument will act
as the sound source and it is this instruments parameters that the Play+ CC
will control. Play+ is the primary lead, handling control and clock while
Tracker is the secondary follower.
CC Cutoff 1
CC Sample Attack 104
CC Reverb Send 14
CC Resonance 11
CC Sample Decay 107
CC Delay Send 15
CC Overdrive 12
.... Mapping > Jack Channel 1
Back Play
The rotary controls in the connected Play+ device
will be automatically mapped to have full integrated
over MIDI CC with Tracker’s selected instruments.
Play+ can control Tracker with It’s grid pads.
MIDI IN
Follow
MIDI OUT
Lead
Instrument
Parameters
Sample
Loader
Note
Play
Rec
Master
Song
Pattern
Backspace
Delete
File
Sample
Editor
FX1
Insert
Home
Perform
Sample
Playback
Instrument
Copy
Paste
Shift
Config
Sample
Recorder
FX2
Tracker:
Cong > MIDI
Play+:
Menu > MIDI > CC Mapping > Jack Channel 1
Choose: Set Values for Polyend TrackerClock In
Clock out
Transport in
Transport out
Notes In
Notes in channel
MIDI out
CC in
CC in channel
Middle C
Clock sync delay
MIDI In jack
Off
MIDI In jack
Off
MIDI In jack
CH1
Off
MIDI In jack
CH1
C-5
0.0
Trackers CC’s are automatically mapped when triggering the ‘Set Value for
Polyend Tracker’ option in the MIDI CC congurations. The CC#’s are mapped to
the Filter Cutoff / Resonance, Sample Attack / Sample Decay, Reverb Send /
Delay Send, Overdrive / Bit Depth. The display will indicate the CC#.
MIDI
10