77
Polyend Play+ Manual Rev 2
NOTES
5.2 Sample Format.
Play+ will accept WAV samples in a variety of formats. The internal audio
engine will operate with uncompressed 16bit stereo PCM Files at various
sample rates. The conversion will be performed automatically to match the
internal audio engine. The sample pool capacity will depend on the type
les stored but is typically 6 Mins with 16-Bit, 44.1kHz Mono WAV’s and 3
mins for Stereo. Lower sample rates will occupy less memory but will also
have lower sound quality. A project holds a maximum of 255 samples.
Sample Formats
WAV Files, Any Sample Rate.
16, 24 or 32 Bit.
Monophonic or Stereo
Play+ will convert samples automatically to match the
desired audio engine format.
Micro SD Card
Project
Sample Pool
Audio Engine
A correctly formatted SD
Card must be installed.
Loaded Project, Max 255 Samples
Example Sample Time; 6 Mins with 44.1 kHz, 16-bit Mono WAV Samples.
Memory is reduced with stereo and lower sample rates
Uncompressed WAV, 16-bit Stereo PCM - Various Sample Rates
6 Mins
100%
Higher sample rates will
reduce available memory
Lower sample rates will
increase available memory
Samples & Synths
5
To Next Page
Loading...
