Polyend Play+ - SD Card Structure

Architecture
2
25
Polyend Play+ Manual Rev 2
2.3 SD Card Structure.
The Micro SD Card is an integral part of Play+ and must be inserted to
operate correctly. An alert message is displayed if Play+ is powered up
without an SD Card installed. It is important that the correct format is
applied to the Micro SD Card. This should be FAT32 with Master Boot
Record (MBR) Partitioning.
The default le structure will expand as different functions are used.
Files and folders can be accessed with a PC or Mac. A USB SD Card
adapter is supplied with Play+.
Micro SD Can be connected to a PC / Mac
with the supplied USB adapter.
NOTES
Root
Artist Samples
Artist factory samples
Firmware
Firmware update les
Sample Packs
Factory supplied, genre based, sample packs.
BeatFills
MelodyFills
Beat ll algorithm les
Melody ll algorithm les.
Projects
Demo projects, user projects, global settings
Samples
Samples. *
Workspace
Export
Patches
Settings, samples, patterns.
Created if les are exportedCreated if les are exported *
Synth patches are under respective folders per synth
* Folders may be created when accessing these functions in Play+.
Always backup the SD card content on a regular basis and before performing an OS Update. Some new folders
may require user created content such as beat ll templates to be relocated when an update is introduced.
Check each update documentation from Polyend when an update is released for specic information.