EasyManua.ls Logo

Polyend Play+ - Copying & Pasting Steps

Polyend Play+
236 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
117
Polyend Play+ Manual Rev 2
NOTES
6.8 Copying & Pasting Steps.
Steps can be copied and pasted across the grid individually and also
between complete tracks including between MIDI and Audio Tracks.
▌ COPYING & PASTING STEP GROUPS
1. Ensure sequencing mode is selected. If pattern mode or perform mode
is selected, Press [Patterns] or [Perform] respectively to toggle back to
Sequencer mode.
2. Hold [Shift] + [Pad] for the active step to copy. Also use the block
selection for group of steps if required. Selected pads lit blue.
3. Press [Copy] to copy the selection to the clipboard.
4. Select the destination step or group of steps to paste into using [Shift] +
[Pad] or block selection equivalent shape to selected steps. This can be
applied across tracks including MIDI, Synth and Audio Sample tracks.
5. Press [Shift] + [Paste] to paste from the clipboard.
▌ COPYING & PASTING TRACKS
1. Ensure sequencing mode is selected. If pattern mode or perform mode
is selected, Press [Patterns] or [Perform] respectively to toggle back to
Sequencer mode. This is the grid view which allows an individual
pattern to be sequenced.
2. Select the track to copy from. Press [Select] green function pad.
Selected pads are lit bright green / purple. Multiple track rows can be
selected.
3. Press [Copy] to copy the selected tracks and the active note steps.
4. Select the track to copy to. Press [Select] function pad. Selected pads
are lit bright green or purple for MIDI / Synth. Multiple track rows can be
selected. The originally selected tracks should be de-selected.
5. Hold [Shift] + [Paste] to paste the copied tracks into the selected tracks.
The highest / upper track selected is the starting track to copy into and
the formation of multiple tracks will be pasted in the same order.
Sequencing Patterns
6
Quick Copy: Note that quick copy can operate for steps, step pages, Patterns and
Variations. Quick copy is performed by keep holding the source [Pad] for about half a
second + Press [Pad] for any destination pads. Pads will ash blue twice when
copied to the clipboard and when pasted.

Table of Contents

Related product manuals