Polyend Play+ - Creating Custom Fill Patterns

139
Polyend Play+ Manual Rev 2
NOTES
Sequencing Patterns
6
6.14 Creating Custom Fill Patterns.
Many of the ll functions use algorithms which use a pattern template as
the reference. For example the ‘beat’ and ‘chord and bass’ lls all draw from
the templates in the BeatFills and MelodyFills folders respectively. These
are essentially patterns. It is therefore possible for user patterns to be
created and to use as custom ll templates.
Important considerations for creating beat ll and melody ll templates
The instructions provided for creating ll templates must be followed exactly
and in the correct sequence in order for the pattern to operate as a
functional ll template when used in Play+.
Beat Fill Melody Fill Description
Instruments Kick, Snare, HiHat Synth, Bass
Beats, synths and bass
instruments for the template
Steps 16 64
Maximum number of steps in
the pattern template
Tracks 3 4
Number of track channels.
Beat needs 1 per instrument.
Chord needs 4 and Bass 1.
Steps 16 64
Maximum number of steps in
the pattern template
Location BeatFills MelodyFills SD Card location folder
Track 1 Kick Synth Note
Based on creating a beat or
melody template
Track 2 Snare Synth Note
Based on creating a beat or
melody template
Track 3 HiHat Synth Note
Based on creating a beat or
melody template
Track 4 - Synth Note Melody template
Track 5 - Bass Melody template