Polyend Play+ - Sample Start; Sample End

60
Polyend Play+ Manual Rev 2
NOTES
Parameter Summary
4
4.9 Sample Start / Sample End.
Description Description
Range / Options
Other Information
Range / Options
Other Information
Primary Parameter Secondary Parameter
Sample start in ms with respect to the
full sample duration.
Sample end in ms with respect to the
full sample duration.
Depends on sample duration. First
value in the display is the start position
in ms. By default this is 0.
The sample start and end are useful in
chopping sample slices across pads on
the sequencer grid.
Depends on the sample duration. First
value in the display is the start
position in ms. By default this
matches the sample duration.
Set an end point before the start point
to play samples in reverse.
Sample Start Sample End
Sample Start
0/282 ms
282/282 ms
LoFi Drone Pattern 5
Sample End
Live Rec Play Perform
MIDI Mode MIDI Mode
The Sample Start knob switches to
Chord in MIDI Mode. This allows the
selection of chords from a library of
predened chord presets.
Reserved for future use.
Synth Mode Synth Mode
The Sample Start parameter knob
switches to Chord in Synth Mode. This
allows the selection of chords from a
library of predened chord presets.
Reserved for future use.