Polyend Play+ - Quick Reference Commands

17
Polyend Play+ Manual Rev 2
1.10 Quick Reference Commands.
Overview
1
Function Action
Play+ Buttons
Description
General Master Volume Turn (Master Volume) Adjusts the master output level
General General Navigation Turn (Screen) Generally navigate, scroll menu selections and options
General Main Menu Press (Screen) Select the main menu options. Display’s prior selected menu.
General Tempo Turn (Tempo)
Adjust the global tempo. Will use an external tempo if another
device is connected for MIDI clock.
General Redo / Undo Hold [Shift] + [Screen]
When shift is held, the undo / redo is presented, if available,
on the lower screen buttons.
General Cut off tail Tap (Master Volume)
Curtail playback of any audio tail immediately. Tap when
sequencer is stopped.
General Save Current State Press [Save] Save the current state of the session.
General Reset Current State Press [Shift] + [Save] Restore / reset the saved state of the session.
General Alphanumeric Char Turn (Screen) or Press [Pad]
In the Alphanumeric QWERTY editor ie naming. Selects the
character. Also press pad for character to select.
General Select Character Press (Screen)
In the Alphanumeric QWERTY editor ie naming. Adds the
selected character.
General Delete Character Press [Fill]
In the Alphanumeric QWERTY editor ie naming. Backspace
delete through characters.
General Move Char Cursor Hold [Shift] + Turn (Screen)
In the Alphanumeric QWERTY editor ie naming. Moves
character entry cursor.
Project Open/Create Project Press (Screen)
Select the main menu options. File menu enables the
opening, saving, creating of projects.
Parameter Select Parameter Tap (Knob) for parameter Select the parameter for view and editing.
Parameter Change Parameter Turn (Knob) for parameter Edits the parameter in view. Also turn (Screen).
Parameter Change Parameter Hold [Shift] +Turn (Knob) Edits the parameter in view with a higher increment.
Parameter Select Parameter Double Tap (Knob) for parameter
Select between secondary and primary parameter for view
and editing.
Parameter Reset Parameter Hold [Pad] + Double Tap [Screen]
With the parameter selected and in view, hold the pad and
quickly double tap the respective left side screen button.
Sequence Play Pattern Press [Play] Screen Play button will play and loop the current pattern
Sequence Play Pattern Chain Hold [Shift] + Press [Play] Screen Play button will play and loop the chain of patterns
Sequence Stop Playback Press [Stop] Screen Play button while playing, will stop playback
Sequence Sequencer Mode [Patterns]
Selects between sequencer and pattern modes. Sequencer
mode enables creation and editing of steps to a pattern.
Sequence Create Step Tap [Pad]
Adds a step to a pattern with work step settings. Operates in
sequencer mode.
Sequence Remove Step Tap [Pad] on existing step Removes a step from a pattern. Sequencer mode.
Sequence Edit Step Hold [Pad] on existing step Adjust parameter while holding step. Sequencer mode.