108
Polyend Play+ Manual Rev 2
NOTES
6.3 Sequencer Mode.
Sequencing mode grid allows sequencing of patterns by adding note steps
Each row represents a track. The grid consist of 8 rows with 16 columns of
pad buttons. The function of the pads depends on the mode selected. The
rst 16 columns left to right represent the pattern steps. The nal 4 right
side columns represent function pads, used to control mute, solo, variation
and selection of each of the tracks. The function pads can also be used to
set the pattern length and view each pattern page.
To play the current pattern: Press [Play]
Mute: Silence the selected tracks. Press [Pad]
16: Step Page 1 - Steps 1-16 - Press [Shift] + [Pad]
Solo: Plays only the selected tracks. Press [Pad]
32: Step Page 2 - Steps 17-32 - Press [Shift] + [Pad]
Variation: Track variation options. Press [Pad]
48: Step Page 3 - Steps 33-48 - Press [Shift] + [Pad]
Select: Selects track to edit. Press [Pad]
64: Step Page 4 - Steps 49-64 - Press [Shift] + [Pad]
Track 1
Sequencer Track Steps Functions
1 9 5 13 16
Track 3
Track 5
Track 7
Track 2
Track 4
Track 6
Track 8
Each [Pad] represents a step in a pattern. Audio and
MIDI notes can be sequenced in up to 64 steps.
Sequencing Patterns
6
Red. Playhead on currently active step - Live Rec Mode. [Play].
White. Step has an active sample or MIDI note event. Tap [Pad].
Yellow. Step has an active Synth 2 note event. Tap [Pad].
Green. Step has an active Synth 3 note event. Tap [Pad].
Sequencer - 8x16 Grid Pad Colors
Off. Step is empty and does not trigger any event. Tap [Pad].
Violet. Step has an active Synth 1 note event. Tap [Pad].
Dim Blue. Selected, empty step. Hold [Shift] + [Pad].
Orange. Playhead on currently active step for a track. [Play].
Blue. Selected, note event step. Hold [Shift] + [Pad].
To Next Page
Loading...
