107
Polyend Play+ Manual Rev 2
NOTES
Sequencing Patterns
6
6.2 The Play+ Grid.
The grid is a multi-functional 8 x 16 button matrix used for various
functions. When working with patterns the grid can operate in sequencer
mode or pattern mode. Sequencer mode allows the creation and editing of
individual patterns across 8 tracks in audio sample or MIDI / Synth modes
and a maximum of 64 steps. This is the normal default view. Pattern mode
helps manage the entire set of patterns, where each grid button represents
one of the 128 individual patterns available within each project.
Mute: Silence the selected tracks. Press a [Mute] pad
Track
Track
Track
Track
Track
Track
Track
Track
Solo: Plays only the selected tracks. Press [Solo] pad
Variation: Track variation options. Press a [Variation] pad
Select: Selects track to edit. Press a [Select] pad
Default view is Sequencer Mode. Press [Patterns] to switch to Pattern Mode.
Last four columns 17-20 are function buttons that control pattern / track options.
This is available in pattern mode, sequencer mode and also when in perform mode.
[Patterns]
Sequence Mode.
Edit and add steps, build melodies and
beats. Sequence a single pattern across
the tracks with up to 64 available steps.
Pattern Mode.
Chain and organise up to 128 patterns
across the grid. Arrange and play
chained loops or individual patterns.
Pattern 1 128 Patterns
To Next Page
Loading...
