Polyend Play+ - First Steps with Projects

30
Polyend Play+ Manual Rev 2
NOTES
Projects & Tracks
3
3.1 First Steps with Projects.
A project must be open when working in Play+. The previously selected
project will be opened automatically on start up. Other projects however
can be opened or created. Ensure the SD Card is installed into Play+.
▌ OPENING AN EXISTING PROJECT
1. When powering on the previous project will be restored. Projects can be
changed or new ones created. Projects are stored on the SD Card.
2. Press (Screen), the multi-functional screen encoder. The main menu
will be displayed. Turning (Screen) will navigate the menu.
3. Turn (Screen) to highlight ‘File’ in the menu.
4. Press (Screen) to select the highlighted ‘File’ option and to open the
submenu options.
5. Turn (Screen) to highlight ‘Open Project’ in the menu.
6. Press (Screen) to select the highlighted ‘Open Project’ option.
7. A prompt ‘Do you want to to save the current project?’ may be offered.
To save, press [Yes] on the left dynamic screen button. If no message is
displayed, i.e. project is already saved, skip this step. Option not to
save is also presented.
8. The SD Card browser will display the folders for the available projects.
The demo project folder will host the factory projects while user projects
will also be available as named. The (Screen) encoder can be used to
navigate by turning and to select a folder. Main folders are represented
by white text. Press the (Screen) encoder on a folder to open its
submenu. Projects folder can be navigated up and down in the
structure.
9. Turn (Screen) to highlight a project to select. Projects, i.e. project
folders are represented by orange text in the browser display.
10. Press [Open] using the lower dynamic screen button when the selected
project is highlighted.
11. The progress bar will be displayed as the project is opened.