Polyend Play+ - Page 127

127
Polyend Play+ Manual Rev 2
NOTES
Sequencing Patterns
6
▌ APPLYING A SCALE AND SCALE FILTER
1. Press the (Screen) Knob to open the main menu.
2. The previously selected menu location will be displayed. If not the main
menu is not in view, use [Back] to navigate up the menu structure.
3. At the main menu level, highlight ‘Scales’ by turning (Screen). Press
(Screen) to select the sub menu for scales.
4. Turn (Screen) to navigate the scales menu and to highlight the desired
option.
5. Scale Type.
• Turn (Screen) to highlight ‘Scale Type’ then press (Screen) to select
the options. Turn (Screen) to highlight and then press (Screen) to
select a desired scale.
• Scales will inuence all existing sequences and MIDI output.
• When changing track scales, notes on existing sequence steps are
adjusted to the new scale by transposing up one or two semitones.
Using a scale on an existing sequence will quantize the notes and
chords to the new scale.
6. Scale Root Note.
• Turn (Screen) to highlight ‘Scale Root Note’ then press (Screen) to
select the options. Turn (Screen) to highlight and then press
(Screen) to select a desired scale root note.
• When changing track root, notes on existing sequence steps are
adjusted to the new scale.
7. Scale Filter.
• Turn (Screen) to highlight ‘Scale Filter’ then press (Screen) to select
the options. Turn (Screen) to highlight and then press (Screen) to
select scale lter on or off.
• When the scale lter is on, the available notes (including repeats)
are limited to the selected scale. The view mode keyboard will still
display as chromatic style but only scale notes are available,
unavailable note keys quantized up.
• Scale lter affects view mode as well as other sequence functions.