Polyend Play+ - Page 15

15
Polyend Play+ Manual Rev 2
Overview
1
NOTES
▌ RESETING PARAMETER DEFAULTS
1. Tap a knob to select a parameter to reset in view. The parameter will be
shown in the display screen.
2. Quickly, double tap the left screen button for the parameter to reset.
The value will return to its default level. The upper and lower screen
buttons represent the upper and lower parameter.
▌ SAVE / RESET THE CURRENT PATTERN STATE
1. Press [Save] to save the current session state.
2. Press [Shift] + [Save] to reset and restore the session state.
▌ STEP & TURN PARAMETER PREVIEW
1. To preview a parameter while turning the knob, the sequencer should
be stopped. Turn (Knob) for the parameter to adjust and preview. Knob
preview behaviour can be changed in the main menu settings.
2. To preview a note step. Press and Hold (Screen) knob + hold [Pad] for
the step with a note to preview.