Polyend Play+ - Page 176

176
Polyend Play+ Manual Rev 2
Effects
9
NOTES
▌ EDITING A MASTER FX CUSTOM PRESET
1. Hold [Shift] + Press [Master FX]. The Master FX option is the secondary
function on the ‘View’ Button.
2. Turn (Screen) knob to scroll and highlight ‘Custom Parameters’.
3. Press (Screen) knob to select and open the custom preset list. Each of
the congurable effects is listed.
4. Turn (Screen) knob to scroll through and highlight the effect to edit. This
will edit the parameters for the ‘Custom’ preset, selectable in the effect
preset options.
5. Press (Screen) to select the effect to edit.
6. The selection of editable parameters for the selected custom effect are
listed. These can be selected by Turning and Pressing (Screen).
7. Each parameter is selected by pressing (screen) and edited individually
by turning (Screen)
8. Press [Back] to back up when the parameter editing is complete.
9. Repeat Steps 7-8 to congure other parameters.
▌ SELECTING A MASTER FX CUSTOM PRESET
1. Hold [Shift] + Press [Master FX]. The Master FX option is the secondary
function on the ‘View’ Button.
2. Turn (Screen) knob to scroll through the effects; Reverb, Delay, Sound,
Limiter, Saturation. The currently active preset will also be displayed for
each effect. Highlight the effect to change.
3. Press (Screen) knob to select and open the preset list for the
highlighted effect. The preset names are designed to give an indication
of the type of sound to expect.
4. Turn (Screen) knob to scroll through and highlight the ‘Custom’ preset.
This is the last option in each effect list and reects the parameters
assigned in the ‘Custom Parameters’ Settings.
5. Press (Screen) to select the custom preset.
6. Press [Back] to backup and then exit the menu.