Polyend Play+ - Page 19

19
Polyend Play+ Manual Rev 2
Overview
1
1.10 Quick Reference Commands.
Function Action
Play Buttons
Description
Pattern Chain Pattern Assemble Patterns in Order
Assemble a series of patterns in a sequential order in pattern
mode. Set an empty pattern slot at the end to trigger loop.
Pattern Delete Pattern Hold [Pad]s + [Shift] + [Delete] Deletes one or more patterns when in Pattern mode.
Pattern Cue Pattern Press [Pad]
When a chain is playing in pattern view, pressing a pad cues
it ready to play next, after completion of current pattern.
Pattern Play Pattern Press [Shift] + [Pad]
When a chain is playing in pattern view, pressing pattern /
shift + pad will play immediately.
Perform Perform Mode Tap Perform [Screen] button Selects Perform mode ready for on the y punch in effects.
Perform Latch Perform Effect Tap [Pad] 8 x 20
Tap to latch / unlatch the effect. The 8 x 20 Grid pads
represent the punch in effects. Tracks must be selected rst
to apply the effect.
Perform Punch In Effect Hold [Pad] 8 x 20
Hold to apply an effect only while holding the pad. The 8 x 20
Grid pads represent the punch in effects. Tracks must be
selected rst to apply the effect.
MIDI MIDI Mode Press [Audio / MIDI]
Switches between Audio track mode and MIDI / Synth track
mode and will display the function pads in purple.
MIDI MIDI Conguration Press (Screen)
The MIDI conguration is contained in the MIDI section of the
main menu.
MIDI MIDI Channel & Port Turn (Sample)
The Sample knob option will operate to set channel and port
in MIDI Mode.
MIDI Pitch Bend Double Tap & Turn (Microtune)
The Note knob option will operate as a pitch bend function
using the secondary Microtune parameter.
Synths Synth Mode Press [Audio / MIDI]
Switches between Audio track mode and MIDI / Synth track
mode which will display the function pads in purple.
Synths Synth Conguration Press (Screen)
The Synth conguration is contained in the Synths section of
the main menu. This includes assigning synth models.
Synths Synth Selection Turn (Sample)
The Sample knob option will operate to set MIDI devices and
also select one of the 3 available synthesizers.
Synths Patch Selection Turn (Sample) Secondary Param
Tap Sample then turn to adjust the patch selection. This is
the secondary folder labelled option.