Polyend Play+ - Page 43

43
Polyend Play+ Manual Rev 2
Project & Tracks
3
NOTES
▌ SETTING A GLOBAL TEMPO
1. Ensure no tracks are selected, ie Column 20 [Select] all dimmed green
2. Tap (Tempo) to view the current tempo.
3. Turn (Tempo). Tempo can be adjusted between 10-400 Beats Per
Minute. Also turning (Screen) encoder knob will change the tempo when
the tempo parameter is selected in view.
4. Any track tempo settings will take the global tempo as a reference.
▌ SETTING INDIVIDUAL TRACK SPEED
1. Select a track or multiple tracks to assign a tempo speed, Press [Select]
for the pad row that represents the desired track. Selected tracks will be
lit bright green.
2. Tap (Tempo) to view the track speed. If more than one track is selected
the adjustments are made relative to each of the selected tracks original
value. A ~ Tilde symbol will be shown if multiple values exist.
3. The parameter control will be track speed as opposed to the global
tempo. Turn (Tempo) to assign a multiplier or divider value to the track.
The (Screen) encoder will also change the speed when tempo is
selected and in view on the screen.
4. Any track speed settings will use the global tempo as it’s reference.