Polyend Play+ - Page 87

87
Polyend Play+ Manual Rev 2
NOTES
▌ OVERVIEW OF SYNTHESIZER BASIC PATCH CONTROLS
1. Ensure the project in which to work is open and active.
2. Press (Screen) to select the options menu.
3. Turn (Screen) to highlight and Press to select ‘Synths’ options.
4. Each of the available 3 synths can have one of the 4 synth models
assigned. This will determine its audio style and format. Turn (Screen)
to highlight and press to select one of the Synths.
5. The available parameters will be presented including the patch. Turn
the (Screen) control to highlight the ‘Patch’.
6. Press (Screen) with ‘Patch’ highlighted to access the patch list. Only
the patches available for the assigned model are available.
7. To Select a Patch. Turn (Screen) to scroll through the patches and
Press (Screen) to select and load a patch to the synth.
8. To Preview a Patch. Turn (Screen) to scroll through the patches
• Press the Upper Left [Screen] button to preview the highlighted
patch. The upper button previews with note C4.
• Press the Lower Left [Screen] button to preview the highlighted
patch. The lower button previews with note C2.
9. For patch management, backup to the main synth menu. Press [Back] if
needed.
• To initialise the patch. Turn (Screen) to highlight ‘Init Patch’. Press
(Screen) to select and initialise the patch to a default state.
• To save the patch. Turn (Screen) to highlight ‘Save Patch’ or ‘Save
Patch as’ to save with a new name. Press (Screen) to save.
• To edit the currently selected patch. Turn (Screen) to highlight ‘Edit
Patch’. Press (Screen) to open the patch editor and access the
settings for the patch parameters.
Samples & Synths
5