Polyend Play+ - Page 93

93
Polyend Play+ Manual Rev 2
NOTES
Samples & Synths
5
Function Parameter Range Description
Oscillators Mix -100% to 100% Oscillator mix
Oscillators Shape 1 0-100
Oscillator 1 shape. Setting morphs between
triangle, saw and square.
Oscillators Shape 2 0-100
Oscillator 2 shape. Setting morphs between
triangle, saw and square.
Oscillators PW 1 -50 to 50 Oscillator 1 Pulse Width
Oscillators PW 2 -50 to 50 Oscillator 2 Pulse Width
Oscillators Tune 1 -36 to 36 st Oscillator 1 Tuning in semitones
Oscillators Tune 2 -36 to 36 st Oscillator 2 Tuning in semitones
Oscillators Finetune -100 to 100 Finetuning in cents
Oscillators Detune 0-100 c Detuning in cents
Oscillators Noise 0-100% Noise amount
Oscillators Sync Options
When set to On, Oscillator 2 resets on each
cycle of Oscillator 1 (Osc 1 controls pitch).
Oscillators Reset 1 Options Oscillator 1 wave reset on note on, on or off
Oscillators Reset 2 Options Oscillator 2 wave reset on note on, on or off
Filter Cutoff 20Hz - 20kHz Filter cutoff frequency.
Filter Resonance 0-100% Resonance amount.
Filter Type Options
Low Pass MG 24dB, Low Pass OB 24dB,
Low Pass OB 12dB, Low Pass SVF 24dB,
Low Pass SVF 12dB, Hi Pass OB 24dB, Hi
Pass OB 12dB, Hi Pass SVF 24dB, Hi Pass
SVF 12dB, Band Pass OB 24dB, Band
Pass OB 12dB, Band Pass SVF 24dB,
Band Pass SVF 12dB, Notch SVF 24dB,
Notch SVF 12dB,
Filter Env Amt -100% to 100% Filter envelope amount
Filter Note track -200% to 200%
Amount of modulation applied based on the
pitch of the note played.