Potter PFC-6006 - Appendix G - Control Panel Menu

7-72
PFC-6006 • 5403559 • REV D • 11/17
Appendix G – Control Panel Menu
5=System Tools
Ethernet Options
1=DHCP Settings
2=Default IP
3=Default Gateway
4=Default Subnet
5=Alternate IP
6=Alt. Gateway
7=Alt. Subnet
Esc=Exit
7=Data Transfer
Select Data
1=Remote Access
2=E-mail History
3=E-mail Cong
4=E-mail Test
5=Server Status
Esc=Exit
1=Point Control
2=Ethernet Status
3=DACT Test
4=DACT Reset
5=Erase History
6=Lamp Test
7=App Revisions
Esc=Exit
6=Programming
1=Username
2=Password
Esc=Exit
1=System Setup
2=LEARN Mode
3=Panel Default
4=IP Settings
5=Dt ID/Pswd
6=Prog ID/Pswd
Esc=Exit
Esc=Exit
MAIN MENU
TIP: To save time, enter the menu selection number on
the keypad to select a function. For example, press “3” to
select “Set Date/Time” from the Main Menu.
4=Walk Test
2=Enable/Disable
MAIN MENU
1=View History 3=Set Date/Time
1=By Point
2=By Zone
Select Device
Internal PWR
Zone _ _ _ _
(Enter Zone #
and press Enter)
1=Disable Inputs
2=Disable Outputs
Esc=Exit
1=AC PWR Delay
2=DACT Setup
3=Display Mode
Esc=Exit
1=USA
2=Canada
Esc=Exit
DACT Setup
1=Line 1 Setup
2=Line 2 Setup
3=Acct 1 Setup
4=Acct 2 Setup
5=Acct 3 Setup
6=Acct 4 Setup
7=Acct 5 Setup
Esc=Exit
Line Setup
1=Enable/Disable
2=Line Monitor
3=No. of Rings
4=Ans. Machine
5=Line Prex
6=Dial Tone Det
Esc=Exit
Acct Setup
1=Rpt Event Type
2=Pri Acct ID
3=Pri Phn No.
4=Pri Rpt Fmt
5=Pri Rpt Test
6=Sec Acct ID
7=Sec Phn No.
8=Sec Rpt Fmt
9=Sec Rpt Test
Esc=Exit